ADT 919A (140 bar)

Pneumatic High Pressure Test Pump ADT 919A

 The ADT 919A Pneumatic High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from -14psi (-0.95bar) to 2000psi (140bar). With a long lever, it just takes 30 seconds to reach 2000 psi (140 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The ADT 919 is an ideal comparison test pump for pressure instruments calibration.

- High Efficiency
  Generate 2000 psi (140 bar) in 30 seconds
 
- High Resolution
  10 Pa (0.1 mbar)
  High-quality screw press for fine pressure adjustment
 
- Great Stability
  A specially designed shut-off valve makes the pressure as stable as possible during calibration.
 
- Durable and Minimal Maintenance
  Built-in gas-liquid isolator protects the pump from moisture and dirt
  The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release 
- Hand-tight Quick Connectors
  Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.

Datasheet